A permanent home installation is the easiest Starlink job and the one most often specified carelessly. The dish goes up once, on a roof or an eave, and it has to survive several years of weather without a second visit. The difference between a good install and a callback is entirely in the mount, the power run and the sealing of every cable entry.
Ce qui change dans ce scénario
What makes a home install different
- The mount is permanent, so it is a drilled or clamped fix with a corrosion-resistant finish — no suction, no magnet.
- The power run is usually mains with a single outdoor-rated run, not a vehicle supply.
- Nobody is coming back in six months, so the sealing and the strain relief have to be right the first time.
- The dish position is often constrained by roof geometry, so clamp range and tilt freedom matter more than on a vehicle.
Ce que vos clients vont demander
What the installer should confirm before ordering
- Roof material and the correct fixings for it — a standard screw set is not appropriate for a metal or slate roof.
- Clamp range versus the pole or rail diameter actually available on site.
- Whether the run is mains or a DC supply from an existing circuit.
- Cable length, including the service loop, versus the distance from the dish to the entry point.
- Whether an enclosure is needed at the entry point, and whether it is indoors or outdoors.
Autres scénarios
RV & Motorhome Fleets
Removable mounts for rental fleets, rigid mounts for camper conversions, and the 12V/24V power chain that keep…
Lire la suite →Marine & Boat Installations
Salt, constant movement and no mains socket. The marine specification, and the three places the budget version…
Lire la suite →Off-Grid & Rural Deployments
No mains, no signal, no technician for 200 km. The off-grid specification: self-contained power, sealed enclos…
Lire la suite →Portable & Mobile Deployments
Gear that gets carried, stacked and packed away. Removable mounts, protected storage and the parts that surviv…
Lire la suite →Business & Site Deployments
Multi-user sites where the dish is only the start: PoE injection, outdoor access points and a switch that make…
Lire la suite →Services OEM / ODM
Outillage sur mesure, identification visuelle et emballages destinés aux distributeurs et aux installateurs.
Lire la suite →Demande de devis grossiste
Vous achetez pour la revente, un projet ou une fiche Amazon ? Envoyez votre quantité cible et votre destination — nous répondons avec un devis et un délai.