Off-grid is where a Starlink install stops being a networking job and becomes a power and enclosure problem. There is no mains, the nearest technician may be a long drive away, and the equipment will be running in temperature extremes for months at a time. The specification that matters is therefore not the mount alone but the whole chain: the power source, the enclosure, the connectors, and whether any of it can be replaced in the field.
Ce qui change dans ce scénario
What makes an off-grid install different
- Power is self-contained. A regulated supply with integrated battery, or a battery with a solar charge path, and the load calculation has to match the available generation.
- Enclosures are outdoor-rated and sealed, with glands matched to the cable diameter and strain relief inside the gland.
- Serviceability is a design requirement. Cable runs, terminations and the supply should be replaceable with common tools.
- Temperature range is a selection criterion, not a nicety — the enclosure is not the same temperature as the air.
- Access for service: the enclosure should open without removing the dish.
Ce que vos clients vont demander
What to confirm before quoting an off-grid bundle
- Available generation: panel size, battery capacity, and the charge controller in use.
- Peak and continuous load, and the expected runtime during a low-generation period.
- Enclosure rating and whether it is pole-mounted or wall-mounted.
- Cable run length between the dish, the enclosure and the battery.
- Whether the site is visited seasonally or continuously, which changes the serviceability requirement.
- Whether a network extension beyond the dish is needed — PoE injection or an outdoor access point.
Autres scénarios
Home & Residential Installations
Fixed home installs: where to mount, how to power it, and what matters when the installer is not coming back n…
Lire la suite →RV & Motorhome Fleets
Removable mounts for rental fleets, rigid mounts for camper conversions, and the 12V/24V power chain that keep…
Lire la suite →Marine & Boat Installations
Salt, constant movement and no mains socket. The marine specification, and the three places the budget version…
Lire la suite →Portable & Mobile Deployments
Gear that gets carried, stacked and packed away. Removable mounts, protected storage and the parts that surviv…
Lire la suite →Business & Site Deployments
Multi-user sites where the dish is only the start: PoE injection, outdoor access points and a switch that make…
Lire la suite →Services OEM / ODM
Outillage sur mesure, identification visuelle et emballages destinés aux distributeurs et aux installateurs.
Lire la suite →Demande de devis grossiste
Vous achetez pour la revente, un projet ou une fiche Amazon ? Envoyez votre quantité cible et votre destination — nous répondons avec un devis et un délai.